Large Imaging Area with a Compact Footprint
The flatbed design accommodates frames up to 1‘300 x 1‘000 mm and an imaging area of 1‘200 x 900 mm, providing large-format flexibility within a compact machine footprint.
Multi! Cube
Versatile Imaging System for Screen and Plate Making
Machine Type | Laser Type | Number of Laser Diodes |
Multi! Cube UV | UV, 405 nm | 16 / 32 / 48 / 64 / 96 / 128 |
Multi! Cube UV-Direct | UV, 380 nm | 16 / 32 / 48 / 64 / 96 / 128 |
Multi! Cube T-Flex | TH, 830 nm | 16 / 32 / 64 / 128 |
Multi! Cube Flex | TH, 980 nm | 16 / 32 / 48 / 64 |
Multi! Cube UV-Flex | UV, 405 nm & TH, 830 nm / TH, 980 nm | Combination upon request |
Feature | Specification |
Machine Dimensions (L x W x H) | 1’200 x 900 mm (47.2 x 35.4 inch)* |
Dual Resolution | 1’300 x 1’000 mm (51.2 x 39.4 inch) |
Laser Type | 1’732 x 2’034 x 1’419 mm (68.2 x 80.1 x 55.9 inch) |
| 800 kg (1’764 lb) |
Number of Laser Diodes | 2’400 / 2’540 / 4’800 / 5’080 / 9’600 / 10’160 / 20’320 dpi** |
Power Supply | 230 V / 50 - 60 Hz / 16 A |
Power Consumption | approx. 0.5 kW / approx. 0.8 kW with extraction |
Ambient Conditions | 40 - 65 % humidity at 18 - 25 °C (64.4 - 77 °F) |
Room Conditions | yellow light***, vibration-free floor |
*1'100 x 900 mm (43.3 x 35.4 inch) > speed reduction ** other resolutions upon request ***only for UV | |
Custom-Built Register Systems
Custom-built register systems enable repeatable positioning of the printing form, helping reduce press setup times and material waste.
Dynamic Autofocus
Dynamic autofocus compensates for variations in material thickness and surface height, maintaining precise focus across the entire working area.
Patented, Individually Fiber-Coupled Laser Diode System
Lüscher‘s patented system connects each laser diode individually to the optical system through an optical fiber. Because the diodes are connected separately, both the wavelength and the number of installed diodes can be selected for the required printing forms and production capacity. This architecture is the basis for combining different laser wavelengths and scaling imaging capacity within one machine.
Fully Automatic Calibration of the Laser Diodes
Before each imaging job, the system checks the settings of the installed laser diodes and calibrates them automatically when required. This keeps the laser output consistent at any time and ensures production reliability.
Modular Imaging Capacity, Upgradeable in 16-Diode Steps
Imaging speed depends on the number of laser diodes. As production demand grows, the system can be upgraded in 16-diode increments, up to 128 diodes depending on the configuration. For example, increasing from 32 to 64 diodes of the same laser type halves the actual imaging time.
Guided Maintenance and Remote Support
The maintenance software informs the operator about required maintenance tasks and guides through the required process steps. An integrated remote-service interface allows the system to be connected to Lüscher‘s technical support for online assistance when required.
